Coyote Swap/Engine
Showing all 6 results
-
AlternatorsBoss 302 200 AMP Alternator Coyote Kit M-8600-M50BALT
Ford Racing Boss 302 Alternator kit. For all 11-21 Coyote Engines. Comes with Idler pulley, Belt, tensioner, and mounting hardware. Ideal for your coyote swap project or replacing that worn out factory alternator.
This is a 200 AMP Unit. A Standard GT Alternator is 130-160 amp.
Works with the Power by the Hour Acessory Drive kit. It is required however to change the clutched pulley to the fixed pulley found on the Automatic Mustang GT or PBH’s fixed pulley.
(0 reviews) -
Coyote Swap
Ultimate Headers Coyote Swap Universal and Early Mustang/F100 Swap Headers
Ultimate Headers 321 Stainless, 1 7/8 Coyote Swap Universal header. These are designed to fit most applications, as well as Roadster Shop Chassis 64-70 Mustangs, as well as F-100 with the Crown Vic Style Front end, Mustang II, Roadster Shop, TCI etc.. Dimensions in the pictures for more information.
Fits all Generation Coyote Engines from 11-21.
- First Gen Mustang on Roadster Shop SPEC Chassis
- F100 with Crown Vic Front End
(0 reviews) -
Sale!Coyote Swap
Ford Racing Gen 3 T-56 Manual Power Module Complete Kit
Ford Performance Gen 3 460HP Crate engine with a Brand new Tremec T-56 Magnum 6 Speed Manual Transmission with a Ford Performance Gen 3 Manual control pack (m-6017-m50b)
This is a Complete turn key ready drivetrain. Comes with clutch, flywheel, pilot bearing, Engine, Transmission, Shifter, and Control pack. Add driveshaft, cooling, fuel system and go!
Ships via Truck Freight
Ford Performance GEN 3 Power Module with 5.0L Coyote Engine, Tremec 6-Speed Transmission and Control Pack.
Next-generation 5.0L power is available in one Ford Performance GEN 3 Power Module M-9000-PMCM3. The crew at Ford Performance makes swapping in a 5.0L Coyote engine simple. This kit teams the Gen-3 460HP 5.0L Coyote V8 up with a state of the art Tremec 6-Speed transmission, plus all the electronics and hardware to streamline the installation.
Features and Benefits:
– Aluminum Block
– Runs on Pump Gas
– Convenient 5.0L Coyote Engine Swap
– Direct and Port Fuel Injection
– Twin Independent Variable Camshaft Timing
– Lightweight Plasma-Transferred Wire Arc Spray
– Plug-And-Play InstallationThe engine features advancements like modern fuel injection, Twin Independent Variable Camshaft Timing, and a lightweight plasma transferred wire arc spray aluminum engine block. The engine Control Pack is true plug-and-play, to make installation in your machine simpler. Topping off this kit is the fantastic Tremec six-speed, which offers modern performance with overdrive.
Included:
– GT GEN 3 5.0L 460 HP Coyote Engine
– Tremec 6-Speed Transmission
– Complete Engine Controller and Wiring Harness (Control Pack)
– Boss 302 Alternator Kit (P/N: M8600M50BALT)
– Starter and Starter Index Plate
– (1) 409 Stainless Steel Tubular Exhaust Manifold (Right Side Only)
– Billet Flywheel (P/N: M-6375-G46A)
– Clutch Kit (P/N: M-7560-T46)
– Clutch Fork/Throwout Bearing
– Steel Quicktime Bellhousing
– Roller Pilot Bearing (P/N: M-7600-B)
– Installation Hardware*Control Pack PCM and installation kit is tunable for power upgrades.
Specifications:
– 460 Horsepower @ 7,000 rpm
– 420 lb.-ft. Torque @ 4,600 rpm
– 12.0:1 Compression ratioPlease Note: The engine will be fitted with a dual-mass flywheel installed. Included is a billet flywheel, to be installed on the engine before installation into the vehicle.
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
(0 reviews) -
Coyote Swap
2011-21 Machined Timing Cover for Swap Brackets
Coyote and Voodoo(5.2L) Machined Timing Cover. This will fit all 2011-2021 5.0L and 5.2L Engines. Comes already Machined for use with Power by the Hour Accessory drive bracket kit. Great replacement for your F-150 timing cover or if yours is damaged!
This timing cover is required to be used with PBH brackets, if you have a mustang timing cover from 2013+ then you can machine it as such, if you have a F-150 timing cover this is a MANDATORY replacement.
(0 reviews) -
Sale!Coyote Swap
Ford 15-17 Gen 2 F-150 Crate Engine Auto/Manual
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.
(0 reviews) -
Sale!COOLING
Bleeder Screw Kit Coyote Swap
Bleeder screw kit is for all Generation Coyote engines. Removes the factory Steam port located in the top of the coolant neck on the driver cylinder head. Ideal in all swap applications when using a traditional style radiator with a cap. This also allows you to bleed your cooling system from the highest point to ensure no air bubbles are left in the system causing an overheating issue.
(0 reviews)
