Power By The Hour
Showing all 5 results
-
Coyote Swap
Gen 2 Coyote Swap Body Harness 15-17 Mustang and F-150 5.0L
Coyote Swap Solution is now here for the Generation 2 Coyote Engine Swap! Works for all 2015-2017 Ford F-150 and Mustang
This is called the body harness which Plugs into the 2nd Port on the PCM. This controls the fans, fuel pump, ignition switch, throttle pedal and also includes the fuse box. Easy way to eliminate that nest of wires you received with your Crank a Pallet that you can not use/fit in your hot rod swap!
Everything is labeled and easy to use. Body Harness works with both Automatic and Manual Computers/applications.
Works with F-150 and Mustang Coyote engines, this will also work with 15-17 3.7L V6 engines for swaps as well.
In stock and ready to ship!
(0 reviews) -
Coyote Swap
PBH-Gen 1 6r80 Control pack 11-14 Mustang/F-150
Power by the Hour Performance’s own Gen 1 Coyote (11-14) 6r80 Automatic Control Pack. Works with all 2011-2014 F-150 or Mustang Engines with the 6r80 Automatic Transmission.
Kit includes the following:
Programmed PCM with PATS OFF (anti theft), Body Harness with Fuse Box, Gas Pedal, Front 02 Sensors, Maf Sensor.
DOES NOT INCLUDE- Engine Harness or Transmission harness. Those are sold Separately.
** Will Not Work with 11-14 F150 transmission harness. Requires the use of Mustang Trans harness or PBH’s PCP-1117 Modified trans harness.
Plug and Play! Just add fuel!
Capable of being tuned with HP tuners or SCT Software.
We also have 6r80 GT500 Control Packs available as well as Gen 1 Manual PBH version control packs available.
(0 reviews) -
Coyote Swap
Coyote Oil Pressure Sender Adapter
Coyote Swap Oil pressure sender adapter from Power by the Hour Performance. Fits all Generation Coyote Engines. Works with OEM Oil Filter housing as well as Canton Oil Filter adapter housing part # 22-627.
This sender adapter is necessary if you are using a Dakota Digital or other aftermarket cluster/sender where the use of multiple or the relocation of the one sender is necessary for clearance. This allows the use of the aftermarket sender as well as the factory unit to be used together.
Installation of this adapter does not require extending OEM oil pressure sending wiring and does not collide with any factory oil coolers, filters, or solenoids.
Both additional ports are 1/8″ NPT. One plug is included with the kit.
The PBH adapter accommodates both the 1/4″ pipe thread and M12x1.5 provisions of oem senders.
(0 reviews) -
Coyote Swap
Power by The Hour PBH-1100 Speed Drive Alternator Relocation for N/A 5.0L Coyote
Power by the Hour Performance Coyote Alternator relocation kit is the solution for the tight fit in your resto-mod coyote swap. The Coyote alternator is known to hit the frame rails on Classic Mustang, Bronco, F100, and Lincoln swaps, requiring the need to move the alternator so you can sit this Coyote into your subframe.
Included in the kit is the Alternator relocation bracket, Hardware, 2 Belt tensioners, and 2 Serpentine belts.
Fits all 11-21 Coyote Engines – Mustang and F-150
Requires the Use of a Mustang Alternator with Clutch-less pulley. Found only in the 11-17 AUTOMATIC GT cars. The use of the clutched pulley will result in a No-Charging scenario. We can sell you the correct pulley separately for $99.00 if using a Manual or Boss 302 Alternator kit.
Requires the use of a Mustang GT Balancer which is a 6 Rib/ 6 Rib design. 2015+ Ford F150 engines received a 6 Rib / 4 Rib balance which would need to be swapped out for the Mustang style.
Requires the use of Ford’s Updated timing cover design from 2013-21. The Early 11-12 Timing covers had added bosses and grooves in the cover that interfere with this kit.
Some grinding of the factory timing cover is required for the alternator case to clear.
(0 reviews) -
Coyote Swap
N/A Kit with Power steering Delete
Coyote Naturally Aspirated Accessory Drive kit to delete power steering but will allow the use of the Ford Modular AC Compressor and the Sanden SD7 Compressor for the Vintage and Resto Mod Air installations.
Requires the Use of a Coyote Mustang Alternator with Fixed Pulley
Requires the Use of a Mustang Coyote Timing cover from 2013-21 Mustang GT
Kit includes brackets, belts, tensioners, hardware for installation
(0 reviews)