Showing 10–18 of 27 results
Ford Performance Gen 3 10R80 Control Pack
Ford Performance M-6017-M50BA for the Generation 3 Coyote with the 10r80 Transmission. Will work with Both the Mustang and F-150 Engines. Please note that the F-150 Engine’s require custom tuning for the firing order change. You will reuse the factory F-150 Engine harness with this control pack.
Requires 65 PSI at Key on with a Return Style Fuel system with regulator!
Comes with Gas Pedal, PCM, Air Tube and Air Box, Brake switch and other switches, body harness with fuse box, front 02 sensors and MAF Sensor.(0 reviews)
Ford Performance Gen 2 6r80 Control Pack AUTO
Ford Performance Gen 2 (2015-17) Control Pack for the AUTO 6r80 Transmission. This control pack will work with all 2015-2017 Ford Mustang 5.0L Engines direct plug and play. It will also work with 15-17 F-150 Engines but will require a custom tune/calibration to change the firing order as well as modifying the engine harness to collaborate with the PCM.
Kit Includes the following: Body Harness with Fuse Box, Flashed PCM, Air Intake tube and Air Box, Front 02 Sensors, Maf Sensor, Brake Switch, gas pedal, everything needed to start your swap, just add fuel!
** Will Work with All 2015-2021 Voodoo Engines 5.2L with just a Firing order/tune change. Use a factory Mustang GT AUTO Engine harness in combination with this control pack.
Gen 1/2 Coyote Oil Pan Kit
Ford Performance Oil Pan Replacement and Conversion Kit. This is a brand new 11-17 Oil Pan with Windage tray (gasket) with the Low Oil Level sensor deleted from it.
This is a direct replacement for all 11-17 Coyote Mustang and F-150 engines. This will also work on Generation 3 (18-21) Coyote Engines with the Power by the Hour Modified Pick up tube. So if you are looking to get rid of the stepped pan and go back to the easy fitment of the previous gen oil pans, then this is the ticket! Fits all hot rod applications, F-100s, 66-77 Bronco, 79-2010 Mustang with Coyote swap.
*PBH Modified Oil Pan Pick up tube required for use with this pan in 2018+ Coyote engines.(0 reviews)
Coyote Oil Pressure Sender Adapter
Coyote Swap Oil pressure sender adapter from Power by the Hour Performance. Fits all Generation Coyote Engines. Works with OEM Oil Filter housing as well as Canton Oil Filter adapter housing part # 22-627.
This sender adapter is necessary if you are using a Dakota Digital or other aftermarket cluster/sender where the use of multiple or the relocation of the one sender is necessary for clearance. This allows the use of the aftermarket sender as well as the factory unit to be used together.
Installation of this adapter does not require extending OEM oil pressure sending wiring and does not collide with any factory oil coolers, filters, or solenoids.
Both additional ports are 1/8″ NPT. One plug is included with the kit.
The PBH adapter accommodates both the 1/4″ pipe thread and M12x1.5 provisions of oem senders.(0 reviews)
BBK Ceramic Coyote Swap Headers 16340 79-04 Mustang
BBK Ceramic Coyote Swap Headers for all Manual Transmission Swaps. These were made specifically for the 79-04 Mustang Fox/SN/New Edge Chassis. Fits with Stock 96-04 K Member or fits with all Maximum motorsports, UPR, Team Z, AJE, and BMR K members. Includes new Gaskets and bolts for install, however i recommend using as many of the factory studs and nuts as possible for installation to ensure no leaks.
WILL NOT WORK WITH 6r80 AUTOMATIC Transmission!!!!
Fits with all TR-3650, T-56, T-5, T-3550, TKO 500/600 and C4 Automatic transmissions.
May fit other swap vehicles(0 reviews)$699.99
McLeod 8 Bolt Flywheel Coyote/Modular
McLeod Lightened Steel Flywheel for all 8 Bolt Crank Modular Vehicles. Will fit all 4.6L/5.4L/5.0L Modular engines with the forged 8 bolt crank.
Compatible with all McLeod Clutches. Great replacement for your GT500 or Coyote car!(0 reviews)$295.00
-Add to cart
Ford 15-17 Gen 2 F-150 Crate Engine Auto/Manual
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.(0 reviews)
Bleeder Screw Kit Coyote Swap
Bleeder screw kit is for all Generation Coyote engines. Removes the factory Steam port located in the top of the coolant neck on the driver cylinder head. Ideal in all swap applications when using a traditional style radiator with a cap. This also allows you to bleed your cooling system from the highest point to ensure no air bubbles are left in the system causing an overheating issue.(0 reviews)