15-17
Showing all 4 results
-
Coyote Swap
Gen 2 Coyote Swap Body Harness 15-17 Mustang and F-150 5.0L
Coyote Swap Solution is now here for the Generation 2 Coyote Engine Swap! Works for all 2015-2017 Ford F-150 and Mustang
This is called the body harness which Plugs into the 2nd Port on the PCM. This controls the fans, fuel pump, ignition switch, throttle pedal and also includes the fuse box. Easy way to eliminate that nest of wires you received with your Crank a Pallet that you can not use/fit in your hot rod swap!
Everything is labeled and easy to use. Body Harness works with both Automatic and Manual Computers/applications.
Works with F-150 and Mustang Coyote engines, this will also work with 15-17 3.7L V6 engines for swaps as well.
In stock and ready to ship!
(0 reviews) -
Coyote Swap
Ford Performance Gen 2 6r80 Control Pack AUTO
Ford Performance Gen 2 (2015-17) Control Pack for the AUTO 6r80 Transmission. This control pack will work with all 2015-2017 Ford Mustang 5.0L Engines direct plug and play. It will also work with 15-17 F-150 Engines but will require a custom tune/calibration to change the firing order as well as modifying the engine harness to collaborate with the PCM.
Kit Includes the following: Body Harness with Fuse Box, Flashed PCM, Air Intake tube and Air Box, Front 02 Sensors, Maf Sensor, Brake Switch, gas pedal, everything needed to start your swap, just add fuel!
** Will Work with All 2015-2021 Voodoo Engines 5.2L with just a Firing order/tune change. Use a factory Mustang GT AUTO Engine harness in combination with this control pack.
M-6017-M50A
(0 reviews) -
Coyote Swap/Control Pack/ford Performance
Ford Performance Gen 2 Coyote MANUAL Control Pack
Ford Performance Gen 2 Manual Control pack – M-6017-504V. Works with all 15-17 Mustang GT 5.0L Engines, and will work with all 15-17 F-150 and GT350 5.2L Engines. The F-150 Engine requires a custom tune/calibration for a firing order change and requires the engine harness to be modified. The GT350 5.2L Voodoo engine requires a Firing order change as well in the Tune, but uses the stock GT350 Engine harness without any modifications needed.
Kit comes complete with Body Harness, PCM, Gas Pedal, front 02 Sensors, MAF Sensor, clutch switch, brake switch, air intake tube and air box. Plug and play!
Does NOT Come with an Engine Harness. You will use the one from your Crate Engine/Donor Vehicle.
(0 reviews) -
Coyote Swap
Ford 15-17 Gen 2 F-150 Crate Engine Auto/Manual
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.
(0 reviews)