f150
Showing all 8 results
-
Alternators
Boss 302 200 AMP Alternator Coyote Kit M-8600-M50BALT
Ford Racing Boss 302 Alternator kit. For all 11-21 Coyote Engines. Comes with Idler pulley, Belt, tensioner, and mounting hardware. Ideal for your coyote swap project or replacing that worn out factory alternator.
This is a 200 AMP Unit. A Standard GT Alternator is 130-160 amp.
Works with the Power by the Hour Acessory Drive kit. It is required however to change the clutched pulley to the fixed pulley found on the Automatic Mustang GT or PBH’s fixed pulley.
(0 reviews) -
Coyote Swap
Gen 2 Coyote Swap Body Harness 15-17 Mustang and F-150 5.0L
Coyote Swap Solution is now here for the Generation 2 Coyote Engine Swap! Works for all 2015-2017 Ford F-150 and Mustang
This is called the body harness which Plugs into the 2nd Port on the PCM. This controls the fans, fuel pump, ignition switch, throttle pedal and also includes the fuse box. Easy way to eliminate that nest of wires you received with your Crank a Pallet that you can not use/fit in your hot rod swap!
Everything is labeled and easy to use. Body Harness works with both Automatic and Manual Computers/applications.
Works with F-150 and Mustang Coyote engines, this will also work with 15-17 3.7L V6 engines for swaps as well.
In stock and ready to ship!
(0 reviews) -
Coyote Swap/Transmission
PBH Built 10r80 (4×4 or 2wd)
Power by the Hour Performance Built 10R80 Transmission. Available in Both 2wd and 4×4 for all F-150, Mustang, as well as Swap Applications. Built to Order, price does nNOT include the transmission core charge. Price shown would be if your core was sent in to be built.
These transmissions receive a brand new Valve Body from Ford, and Mcleod Upgraded Frictions and Steels. Bolt in and go! Just add Fluid!
*Only Recommended fluid for this transmission is Ford Motorcraft MERCON ULV*
*Depending on the size of the transmission cooler as well as converter if empty normal fill can take up to 16 Quarts of fluid. Full Should show between the B and C on the transmission dipstick.
IF you do need a core provided to have built please budget $1800-$2400 for the core depending on application.
(0 reviews) -
Coyote Swap
2011-21 Machined Timing Cover for Swap Brackets
Coyote and Voodoo(5.2L) Machined Timing Cover. This will fit all 2011-2021 5.0L and 5.2L Engines. Comes already Machined for use with Power by the Hour Accessory drive bracket kit. Great replacement for your F-150 timing cover or if yours is damaged!
This timing cover is required to be used with PBH brackets, if you have a mustang timing cover from 2013+ then you can machine it as such, if you have a F-150 timing cover this is a MANDATORY replacement.
(0 reviews) -
Coyote Swap
Ford 15-17 Gen 2 F-150 Crate Engine Auto/Manual
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.
(0 reviews) -
-
Coyote Swap
Trans Cooler Kit -8 AN
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
(0 reviews) -
Coyote Swap
N/A Kit with Power steering Delete
Coyote Naturally Aspirated Accessory Drive kit to delete power steering but will allow the use of the Ford Modular AC Compressor and the Sanden SD7 Compressor for the Vintage and Resto Mod Air installations.
Requires the Use of a Coyote Mustang Alternator with Fixed Pulley
Requires the Use of a Mustang Coyote Timing cover from 2013-21 Mustang GT
Kit includes brackets, belts, tensioners, hardware for installation
(0 reviews)