gt500
Showing all 6 results
-
Sale!
Coyote SwapPBH-Gen 1 6r80 Control pack 11-14 Mustang/F-150
Power by the Hour Performance’s own Gen 1 Coyote (11-14) 6r80 Automatic Control Pack. Works with all 2011-2014 F-150 or Mustang Engines with the 6r80 Automatic Transmission.
Kit includes the following:
Programmed PCM with PATS OFF (anti theft), Body Harness with Fuse Box, Gas Pedal, Front 02 Sensors, Maf Sensor.
DOES NOT INCLUDE- Engine Harness or Transmission harness. Those are sold Separately.
** Will Not Work with 11-14 F150 transmission harness. Requires the use of Mustang Trans harness or PBH’s PCP-1117 Modified trans harness.
Plug and Play! Just add fuel!
Capable of being tuned with HP tuners or SCT Software.
We also have 6r80 GT500 Control Packs available as well as Gen 1 Manual PBH version control packs available.
(0 reviews) -
Clutch Kits
McLeod RXT 1200 HD For TR6060
McLeod RXT 1200 HD for all Tremec TR-6060 6 Speed transmissions. Rather for 1200 HP, this is the heavier duty version of the standard RXT. Retains near stock feel pedal engagement, with increased holding power, this is the clutch of choice for your Modified GT500, CTS-V, Camaro, or Challenger.
NOTE: 07-09 GT500 applications will come with a New flywheel in the kit. 2010-14 GT500 will re use the factory flywheel.
(0 reviews) -
Sale!
-
Sale!
-
Sale!Ford Performance Parts
Ford Performance 52 lb/hr Fuel Injector Set
Ford Racing MU52 56#/HR Rated Fuel Injectors. EV6 Plug design, which will fit all late-model Ford vehicles. Ideal for a Supercharged/Turbocharged Coyote swap, and will work on a Naturally aspirated Coyote swap wanting to run E85.
These injectors will support roughly 800 RWHP on 93 Octane Fuel and 650 RWHP roughly on E85 fuel.
(0 reviews) -
Sale!Coyote Swap
Trans Cooler Kit -8 AN
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
(0 reviews)
