Fan Control, Single, 40 Amp Relay, Thermostatic, 195 Deg. On/175 Deg. Off, Sending Unit.
Spal electric fan wiring harness kits are a must-have when installing electric fans. Designed to safely integrate with OEM wiring, the Spal kits feature a waterproof relay along with printed wires which aid in installation. The wiring kits also feature stainless steel switches with optional switched override capability, fuse holder, and wiring connectors.
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
Derale’s Quality Single Fanned Transmission/Oil Cooler with shroud is the go to on your high performance vehicle or swap application. Cooler comes with -8AN Male fittings which allows for easy adaptation to suit your needs!
Mounts easily to all 79-21 Mustangs under the headlight area in the front bumper cover.
Mounts to Early Bronco and F100 easily under the driver floor pan
Also easy to rear mount on the 05-21 Mustangs under the spare tire well with the Evap System removed
Aeromotive Phantom Stealth Single 340LPH assembly is perfect for your Naturally aspirated or low boost application. Return Style hat with -6 AN Ports, comes complete with instructions, template, installation hardware, fuel pump and hat, and the sock. Will fit virtually any fuel tank from 5.5 inches to 11 inches deep. Works with Fuel cells as well! This set up is great for LS and Coyote swap candidates, as well as Vintage Bronco, F100, and Mustang’s. By running an intank pump the risk of it burning out on extended trips is virtually non existent. Do not get stuck running a loud external pump, grab this Phantom kit today!
Whipple’s latest Gen 5 3.0L offers dynamite out of the box performance and winning results. Stage 2 Tuner kit. Complete kit minus Injectors and fuel pump upgrades, as well as custom tuning. Churning out over 600 HP out of the box, it is just a few pulley changes away from breaking the 4 Digit HP number. Standard Color with kit is Black. If you would like a custom color or polished finish please inquire within for additional cost and potential lead times.
Recommended injectors for this kit on a swap or factory vehicle:
Whipple’s Elliptical 132mm throttle body is an available option for an additional $650.
To add power steering and air conditioning with this kit in a swap application, see kit SS-15XX.
Recommended spark plugs for this kit is NGK TR6 (#6510) gapped to .028 or per your tuners request.