6r80 and 10r80 Automatic transmission cooler fitting kit. Billet aluminum, anodized black, -8 AN inlet and outlet fittings. Fits all 6r and 10r Transmissions. Ideal for aftermarket transmission cooler installations.
Kit comes with Hold Down Plate, Bolt, (2) -8 AN 90* Low profile fittings with O-rings installed. Simple bolt on installation
Note: When installing, confirm that the factory transmission cooler fitting o-rings are not stuck in the hole. This will cause installation issues as well as fluid leaks.
Ford Performance M-6017-M50BA for the Generation 3 Coyote with the 10r80 Transmission. Will work with Both the Mustang and F-150 Engines. Please note that the F-150 Engine’s require custom tuning for the firing order change. You will reuse the factory F-150 Engine harness with this control pack.
Requires 65 PSI at Key on with a Return Style Fuel system with regulator!
Comes with Gas Pedal, PCM, Air Tube and Air Box, Brake switch and other switches, body harness with fuse box, front 02 sensors and MAF Sensor.
McLeod RXT Twin Disc Clutch for all T-56 Manual Transmissions with the 26 Spline Input Shaft. This clutch kit also fits TR-3650 with upgraded 26 Spline input shaft. Clutch is rated to hold up to 1000 HP and is the clutch of choice if your car sees abuse! Comes with clutch alignment tool.
Fits All : 03/04 Cobra w/26 Spline Input, 98-02 Camaro SS and Z-28, 01-10 Mustang GT/Bullitt/Mach 1/ Cobra with a Built TR-3650, All 11-17 Mustang GT’s with a T-56 Magnum swap, Coyote Swap with T-56 swap.
Direct Bolt up to all Coyote Swap engines when paired with McLeod’s Flywheel part # 463458. Will also work with Modular Shelby GT500 engines when paired to a T-56 trans. Works with Some OEM Coyote and Modular Flywheels, see NOTES below for info.
NOTE: GM LS-X Applications will only work with LS1/LS6 Flat style flywheels, 2001.5 to 2015 Mustang 4.6L/5.0L/5.4L factory flywheels may not work due to the large crank relief in the center of the flywheel. Crank relief must be 6.250 in. or smaller for correct disc to flywheel contact.
5.0L Coyote Mustang Alternator. For all 2011-2021. Will come with the Fixed Pulley which allows the alternator to charge in its original location and when flipped backwards using the Power by the Hour bracket kit. 150 AMP Alternator. Remanufactured. No issues. Will also fit 5.2L Engines.