Additional information
| Weight | 40 lbs |
|---|---|
| Dimensions | 42 × 15 × 20 in |
BBK Chrome Coyote Swap Headers 1634 79-04 Mustang
Related products
-
Sale!
Exhaust02 Sensor Bung M18x1.5
Vibrant Weld in 02 Sensor /Wide band Bung for all Exhaust/Metal tubing. Can also be used as a bung for a coolant temp sensor. M18x1.5
(0 reviews) -
Sale!Coyote Swap
Ford 15-17 Gen 2 F-150 Crate Engine Auto/Manual
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.
(0 reviews) -
Sale!COOLING
Hot Water Adapters
Hot Water adapters simplify the Coyote engine’s complicated degas system. These fittings allow the use of a traditional style radiator that uses a cap, and does NOT require the use of a plastic degas overflow bottle, nor the use of the steam port. These fittings accept 5/8 and 3/4 ID Heater Hoses.
Included in this kit is a hot water adapter for each cylinder head. The hose kit and clamps are sold separately. Loop coolant from head to head if you are not running a heater core, or run a heater hose to each port of the core and be done with this part of the cooling system.
Fits all 11-21 Coyote engines. Works with Supercharged applications as well.
(0 reviews) -
Sale!COOLING
Bleeder Screw Kit Coyote Swap
Bleeder screw kit is for all Generation Coyote engines. Removes the factory Steam port located in the top of the coolant neck on the driver cylinder head. Ideal in all swap applications when using a traditional style radiator with a cap. This also allows you to bleed your cooling system from the highest point to ensure no air bubbles are left in the system causing an overheating issue.
(0 reviews)
Reviews
There are no reviews yet.