Additional information
Weight | 1000 lbs |
---|---|
Dimensions | 48 × 48 × 48 in |
-
Ford Performance’s Gen 3 10r80 Automatic Power module! 460HP Crate Gen 3 Engine, 10r80 10 Speed Automatic Transmission, topped off with Ford Performance Gen 3 10r80 Control pack! Complete drivetrain minus the driveshaft for easy installation into your Resto-mod or swap!
Complete Modern Powertrain Solution for Any Ford
Next generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec’d out a complete kit to simplify the swap of modern 5.0L Coyote power into just about Ford vehicle. The Coyote Power Module teams the Mustang GT 460 horsepower 5.0L Coyote V8 with a state of the art 10R80, 10-Speed automatic transmission – and all the electronics and hardware to finish the installation. The engine features advances like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing, and a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote Power Module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized driveability. The engine control pack and wiring harness is truly plug and play and simplifies the conversion to modern electronically fuel injected V8 high performance engine.
$19,375.00 $18,655.00
Weight | 1000 lbs |
---|---|
Dimensions | 48 × 48 × 48 in |
Derale’s Quality Single Fanned Transmission/Oil Cooler with shroud is the go to on your high performance vehicle or swap application. Cooler comes with -8AN Male fittings which allows for easy adaptation to suit your needs!
Mounts easily to all 79-21 Mustangs under the headlight area in the front bumper cover.
Mounts to Early Bronco and F100 easily under the driver floor pan
Also easy to rear mount on the 05-21 Mustangs under the spare tire well with the Evap System removed
Universal Fitment/Application
Coyote Swap Hot Water Bypass kit allows engine coolant to flow from cylinder head to cylinder head with out having the need to run a heater core. This is ideal for race applications, or anyone looking for a clean engine bay without all the hose routing nightmares that come with it.
Kit comes with Hose, Billet fittings for each cylinder head, and hose clamps.
Fits all Gen 1, 2, and 3 Coyote engines from 2011-2021.
Coyote Naturally Aspirated Accessory Drive kit to delete power steering but will allow the use of the Ford Modular AC Compressor and the Sanden SD7 Compressor for the Vintage and Resto Mod Air installations.
Requires the Use of a Coyote Mustang Alternator with Fixed Pulley
Requires the Use of a Mustang Coyote Timing cover from 2013-21 Mustang GT
Kit includes brackets, belts, tensioners, hardware for installation
Pair of Pre Molded Heater Core hoses to accompany the Hot Water Adapter kit. These supplied hoses have a 90* bend at one end, and are straight at the other to connect at the heater core. 48″ Long. 3/4 and 5/8 ID Hoses.
If 2 of the 5/8 or 2 of the 3/4 size hose is desired instead of 1 and 1 we can make that accommodation for you. Just specify at check out or call/email.
Reviews
There are no reviews yet.