Pair of Pre Molded Heater Core hoses to accompany the Hot Water Adapter kit. These supplied hoses have a 90* bend at one end, and are straight at the other to connect at the heater core. 48″ Long. 3/4 and 5/8 ID Hoses.
If 2 of the 5/8 or 2 of the 3/4 size hose is desired instead of 1 and 1 we can make that accommodation for you. Just specify at check out or call/email.
Brand New 0 Mile Gen 2 F-150 Crate Engine. Outfitted with Mustang Timing Cover, and Mustang intake manifold with CMCV’s, Mustang oil filter housing, and a Modified New OEM Engine harness to work as plug and play with Ford Racing Gen 2 Control Pack – this is the solution if you do not want to use the visually ugly Gen 3 and avoid any additional hurdles or $$ to swap oil pans to try to make the Gen 3 fit where the Gen 2 did without a story.
This engine is 10:5:1 Compression, boasts 385HP and 387 TQ at the flywheel. Shares the same Forged Bottom end, and cylinder heads as a Mustang engine. With Headers, Air intake and Tuning, you can expect near identical power numbers. This is a great Engine for a Bronco or F100 Swap where High RPM or a Max Effort style engine is not required.
Engine comes complete intake to oil pan, with coil packs, spark plugs, fuel rails, engine harness for either Auto or Manual trans. Can upgrade to a Boss 302 or Gen 3 Intake Manifold if desired in place of the Gen 2 Mustang Manifold for an additional cost. Please specify at check out.
These Crate Engines Ship in 1-5 Business Days to your Residence or Business address via Truck Freight.
Aeromotive Phantom Stealth Single 340LPH assembly is perfect for your Naturally aspirated or low boost application. Return Style hat with -6 AN Ports, comes complete with instructions, template, installation hardware, fuel pump and hat, and the sock. Will fit virtually any fuel tank from 5.5 inches to 11 inches deep. Works with Fuel cells as well! This set up is great for LS and Coyote swap candidates, as well as Vintage Bronco, F100, and Mustang’s. By running an intank pump the risk of it burning out on extended trips is virtually non existent. Do not get stuck running a loud external pump, grab this Phantom kit today!
Coyote Swap Solution is now here for the Generation 2 Coyote Engine Swap! Works for all 2015-2017 Ford F-150 and Mustang
This is called the body harness which Plugs into the 2nd Port on the PCM. This controls the fans, fuel pump, ignition switch, throttle pedal and also includes the fuse box. Easy way to eliminate that nest of wires you received with your Crank a Pallet that you can not use/fit in your hot rod swap!
Everything is labeled and easy to use. Body Harness works with both Automatic and Manual Computers/applications.
Works with F-150 and Mustang Coyote engines, this will also work with 15-17 3.7L V6 engines for swaps as well.
The Coyote billet upper radiator hose adapter allows the use of any parts store or custom radiator hose in your swap. No need to be stuck using the factory upper hose from a mustang, this adapter allows the use of any 1.5″ radiator hose. Installation is simple, just quick connects to the factory thermostat neck, snap the clip down and you are done.