Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 18 × 18 × 6 in |
Spal 16″ Puller Fan 2024 CFM 12v
Sale!
Related products
-
Sale!
COOLING185 Degree Thermo-Switch, Relay and Harness
Fan Control, Single, 40 Amp Relay, Thermostatic, 185 Deg. On/165 Deg. Off, Sending Unit
Spal electric fan wiring harness kits are a must-have when installing electric fans. Designed to safely integrate with OEM wiring, the Spal kits feature a waterproof relay along with printed wires which aid in installation. The wiring kits also feature stainless steel switches with optional switched override capability, fuse holder, and wiring connectors.
(0 reviews) -
Sale!Coyote Swap
Trans Cooler Kit -8 AN
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
(0 reviews) -
Sale!COOLING
Heater Core Bypass Kit
Coyote Swap Hot Water Bypass kit allows engine coolant to flow from cylinder head to cylinder head with out having the need to run a heater core. This is ideal for race applications, or anyone looking for a clean engine bay without all the hose routing nightmares that come with it.
Kit comes with Hose, Billet fittings for each cylinder head, and hose clamps.
Fits all Gen 1, 2, and 3 Coyote engines from 2011-2021.
(0 reviews) -
Sale!COOLING
Bleeder Screw Kit Coyote Swap
Bleeder screw kit is for all Generation Coyote engines. Removes the factory Steam port located in the top of the coolant neck on the driver cylinder head. Ideal in all swap applications when using a traditional style radiator with a cap. This also allows you to bleed your cooling system from the highest point to ensure no air bubbles are left in the system causing an overheating issue.
(0 reviews)
Reviews
There are no reviews yet.