Coyote Naturally Aspirated Accessory Drive kit to delete power steering but will allow the use of the Ford Modular AC Compressor and the Sanden SD7 Compressor for the Vintage and Resto Mod Air installations.
Requires the Use of a Coyote Mustang Alternator with Fixed Pulley
Requires the Use of a Mustang Coyote Timing cover from 2013-21 Mustang GT
Kit includes brackets, belts, tensioners, hardware for installation
Holley Low profile Coyote Swap Oil pan for all Gen 1 and 2 Coyote engines (11-17). Provides extra clearance over the stock pan when needed in your swap project. Comes with new pick up tube specific for the Holley oil pan. Reuse the factory windage tray/gasket. -10 ORB port is on the pan for turbo applications. Retains the factory 8 Quart Capacity and is a clear Zinc finish. Pan design includes a bung on the left side of the sump for the stock Mustang Coyote oil level sensor.
** Picture of pan installed is on a 79-93 Foxbody Mustang with UPR K member and ARH exhaust.
SPAL Fan Universal mounting clips, these install through the fins of the radiator or cooler and allow you to secure the fan to the radiator. Price is for 1 single clip. Recommend 4 Clips per Fan/Radiator set up.