NGK TR6 Spark plugs are a heat range cooler than a factory spark plug. Ideal for boosted applications. Recommended Spark Plug Gap on most boosted applications is .028-.032
-96-10 Ford Modular 4.6L/5.4L Engine’s.
-2007-2014 Ford Mustang Shelby GT500 Supercharged 5.4L and 5.8L Engine.
| Weight | 2 lbs |
|---|---|
| Dimensions | 6 × 6 × 4 in |
Ford Performance M-6017-M50BA for the Generation 3 Coyote with the 10r80 Transmission. Will work with Both the Mustang and F-150 Engines. Please note that the F-150 Engine’s require custom tuning for the firing order change. You will reuse the factory F-150 Engine harness with this control pack.
Requires 65 PSI at Key on with a Return Style Fuel system with regulator!
Comes with Gas Pedal, PCM, Air Tube and Air Box, Brake switch and other switches, body harness with fuse box, front 02 sensors and MAF Sensor.
Power by the Hour Performance Built 10R80 Transmission. Available in Both 2wd and 4×4 for all F-150, Mustang, as well as Swap Applications. Built to Order, price does nNOT include the transmission core charge. Price shown would be if your core was sent in to be built.
These transmissions receive a brand new Valve Body from Ford, and Mcleod Upgraded Frictions and Steels. Bolt in and go! Just add Fluid!
*Only Recommended fluid for this transmission is Ford Motorcraft MERCON ULV*
*Depending on the size of the transmission cooler as well as converter if empty normal fill can take up to 16 Quarts of fluid. Full Should show between the B and C on the transmission dipstick.
IF you do need a core provided to have built please budget $1800-$2400 for the core depending on application.
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
Ultimate Headers Stainless Long Tube Coyote Swap Headers for all 79-04 Ford Mustang and Fox Chassis vehicles. Fits all Gen Coyote Engines, and they clear the 6r80 Automatic, the 10r80 Automatic, as well as the MT-82, TR6060, and T-56 Magnum transmissions.
1 7/8 with 3″ Collector. Natural finish stainless steel.
For Use with UPR, AJE, and Team Z tubular K Members.
Requires the use of a 96-00 GT Mustang 4.6L Starter, or a Ford Racing Low Profile Mini Starter with these headers. Also recommended the use of Maximum Motorsports Low profile steering shaft or Flaming River low profile steering shaft for added clearance.
Reviews
There are no reviews yet.