Turbo Smart Fuel Filter Mounting Bracket. Take the guess work and fabrication time out of your fuel system install with this anodized black mount! For use with Turbosmart 1.75 in. O.D. Filters, Aluminum, Black Anodized
Trans Cooler kit comes complete with a Single Fanned Cooler, (4) -8an Straight fittings, (2) -8an ORB fittings from the cooler, and a 20 foot roll of -8 AN cooler lines. This is a universal fitment cooler. Can be run without the fan and shroud if desired. Sold separately is the Trans cooler fitting kit if this is to be installed with a 6r80 or 10r80 transmission.
Mounting Locations for the following vehicles: (custom bracketry may be required)
66-77 Bronco- Floor Pan under Driver or passenger seat.
05-14 Mustang and GT500 – Driver side of Front Bumper cover under headlight
05-21 Mustang- Remove EVAP assembly under spare tire well and install cooler in place. Note: Longer run of line required to make it to the back of the car.
Coyote Naturally Aspirated Accessory Drive kit to delete power steering but will allow the use of the Ford Modular AC Compressor and the Sanden SD7 Compressor for the Vintage and Resto Mod Air installations.
Requires the Use of a Coyote Mustang Alternator with Fixed Pulley
Requires the Use of a Mustang Coyote Timing cover from 2013-21 Mustang GT
Kit includes brackets, belts, tensioners, hardware for installation
Aeromotive’s Dual Phantom Stealth is the solution to your Forced Induction Swap Needs. (2) 340LPH Fuel Pumps capable of supporting 1000 HP Flywheel on Pump gas, and 850Hp flywheel on E85 fuel. Will fit virtually in any fuel tank or fuel cell that is 5.5″ to 11″ deep, extension kits are available if needed for a deeper fuel tank.
This is a return-style hat requiring a Feed and Return fuel line. The had is set up for -6AN, but we can configure it with the correct -8 AN ORB adapter if your fuel system is all -8AN.
Works very well in all 79-97 Mustang OEM fuel Tank, 66-77 Bronco, 65-73 Ford Mustang and Mercury Cougar, Ford Falcon, and All Ford F-100s running a mustang style fuel tank under the bed with the Coyote Swap application.
Works with all LS and Hemi Swaps.
Pictures in the gallery show the install on a customer’s Foxbody Mustang re-using the factory fuel tank found in the 79-97 Mustang’s, equipped with a Whipple supercharger. Clean install and clears the spare tire well floor with no fitment issues!