Showing 1–9 of 10 results
Coyote 5.0L Alternator with Fixed Pulley 150 AMP
5.0L Coyote Mustang Alternator. For all 2011-2021. Will come with the Fixed Pulley which allows the alternator to charge in its original location and when flipped backwards using the Power by the Hour bracket kit. 150 AMP Alternator. Remanufactured. No issues. Will also fit 5.2L Engines.
In stock, will ship same day.(0 reviews)$229.99
-Add to cart
Ultimate Headers Coyote Swap Universal and Early Mustang/F100 Swap Headers
Ultimate Headers 321 Stainless, 1 7/8 Coyote Swap Universal header. These are designed to fit most applications, as well as Roadster Shop Chassis 64-70 Mustangs, as well as F-100 with the Crown Vic Style Front end, Mustang II, Roadster Shop, TCI etc.. Dimensions in the pictures for more information.
Fits all Generation Coyote Engines from 11-21.
- First Gen Mustang on Roadster Shop SPEC Chassis
- F100 with Crown Vic Front End
-Add to cart
PBH Built 10r80 (4×4 or 2wd)
Power by the Hour Performance Built 10R80 Transmission. Available in Both 2wd and 4×4 for all F-150, Mustang, as well as Swap Applications. Built to Order, price does nNOT include the transmission core charge. Price shown would be if your core was sent in to be built.
These transmissions receive a brand new Valve Body from Ford, and Mcleod Upgraded Frictions and Steels. Bolt in and go! Just add Fluid!
*Only Recommended fluid for this transmission is Ford Motorcraft MERCON ULV*
*Depending on the size of the transmission cooler as well as converter if empty normal fill can take up to 16 Quarts of fluid. Full Should show between the B and C on the transmission dipstick.
IF you do need a core provided to have built please budget $1800-$2400 for the core depending on application.(0 reviews)$5,299.99
2011-21 Machined Timing Cover for Swap Brackets
Coyote and Voodoo(5.2L) Machined Timing Cover. This will fit all 2011-2021 5.0L and 5.2L Engines. Comes already Machined for use with Power by the Hour Accessory drive bracket kit. Great replacement for your F-150 timing cover or if yours is damaged!
This timing cover is required to be used with PBH brackets, if you have a mustang timing cover from 2013+ then you can machine it as such, if you have a F-150 timing cover this is a MANDATORY replacement.(0 reviews)$199.99
-Add to cart
Ford Performance Gen 3 10R80 Control Pack
Ford Performance M-6017-M50BA for the Generation 3 Coyote with the 10r80 Transmission. Will work with Both the Mustang and F-150 Engines. Please note that the F-150 Engine’s require custom tuning for the firing order change. You will reuse the factory F-150 Engine harness with this control pack.
Requires 65 PSI at Key on with a Return Style Fuel system with regulator!
Comes with Gas Pedal, PCM, Air Tube and Air Box, Brake switch and other switches, body harness with fuse box, front 02 sensors and MAF Sensor.(0 reviews)
Coyote Swap/Control Pack/ford Performance
Ford Performance Gen 3 MANUAL Control pack M-6017-M50B
Ford Performance Gen 3 Manual Control pack, M-6017-M50B , works with all 2018+ Gen 3 Mustang and F-150 Engines. Please note that F-150 Engines require a custom tune for a firing order change. You will re use the factory F-150 or Mustang engine harness that came with your crate engine or donor engine.
Requires 65 PSI at Key on power with a Return Style fuel system with regulator. Requires 340LPH Or greater Fuel pump for Naturally Aspirated Applications.(0 reviews)
Coyote Oil Pressure Sender Adapter
Coyote Swap Oil pressure sender adapter from Power by the Hour Performance. Fits all Generation Coyote Engines. Works with OEM Oil Filter housing as well as Canton Oil Filter adapter housing part # 22-627.
This sender adapter is necessary if you are using a Dakota Digital or other aftermarket cluster/sender where the use of multiple or the relocation of the one sender is necessary for clearance. This allows the use of the aftermarket sender as well as the factory unit to be used together.
Installation of this adapter does not require extending OEM oil pressure sending wiring and does not collide with any factory oil coolers, filters, or solenoids.
Both additional ports are 1/8″ NPT. One plug is included with the kit.
The PBH adapter accommodates both the 1/4″ pipe thread and M12x1.5 provisions of oem senders.(0 reviews)
McLeod RXT Twin Disc for T56 26-Spline
McLeod RXT Twin Disc Clutch for all T-56 Manual Transmissions with the 26 Spline Input Shaft. This clutch kit also fits TR-3650 with upgraded 26 Spline input shaft. Clutch is rated to hold up to 1000 HP and is the clutch of choice if your car sees abuse! Comes with clutch alignment tool.
Fits All : 03/04 Cobra w/26 Spline Input, 98-02 Camaro SS and Z-28, 01-10 Mustang GT/Bullitt/Mach 1/ Cobra with a Built TR-3650, All 11-17 Mustang GT’s with a T-56 Magnum swap, Coyote Swap with T-56 swap.
Direct Bolt up to all Coyote Swap engines when paired with McLeod’s Flywheel part # 463458. Will also work with Modular Shelby GT500 engines when paired to a T-56 trans. Works with Some OEM Coyote and Modular Flywheels, see NOTES below for info.
NOTE: GM LS-X Applications will only work with LS1/LS6 Flat style flywheels, 2001.5 to 2015 Mustang 4.6L/5.0L/5.4L factory flywheels may not work due to the large crank relief in the center of the flywheel. Crank relief must be 6.250 in. or smaller for correct disc to flywheel contact.(0 reviews)$955.00
-Add to cart