2021
Showing 1–9 of 12 results
-
Coyote Swap/Transmission
PBH Built 10r80 (4×4 or 2wd)
Power by the Hour Performance Built 10R80 Transmission. Available in Both 2wd and 4×4 for all F-150, Mustang, as well as Swap Applications. Built to Order, price does nNOT include the transmission core charge. Price shown would be if your core was sent in to be built.
These transmissions receive a brand new Valve Body from Ford, and Mcleod Upgraded Frictions and Steels. Bolt in and go! Just add Fluid!
*Only Recommended fluid for this transmission is Ford Motorcraft MERCON ULV*
*Depending on the size of the transmission cooler as well as converter if empty normal fill can take up to 16 Quarts of fluid. Full Should show between the B and C on the transmission dipstick.
IF you do need a core provided to have built please budget $1800-$2400 for the core depending on application.
(0 reviews) -
Fuel Delivery
-6AN Loaded Regulator
-6 AN Fuel Pressure Regulator from FORE INNOVATIONS. You can always rely on Fore for quality fuel components. The -6 AN regulator comes loaded with -6AN ORB Male ports for the feed and return ports, a fuel pressure gauge, and port plug. Completely adjustable, easy to use, and always accurate!
Works extremely well in any Coyote or LS swap Application, as well as Factory vehicles when upgrading to a return-style fuel system.
NOTE: 2 Regulators are Required for installation in a factory 2018-21 Mustang with Direct Injection. One for Port Injection and the other for Direct Injection. Please call or email for quote for a complete Fore Fuel System or custom application.
(0 reviews) -
Fuel Systems
6 AN Fuel Hose 20ft
20 Foot Roll of Flex -6AN Fuel Hose. High quality, flexible, no scent fuel hose. E85 Compatible. This is a high quality fuel line roll that will work with any -6 Compression style fitting. No cut fingers or hard installation like the PTFE lined hose.
Ideal for Feed or Return line with your fuel system. On average, 20 Foot of line will reach from the Fuel tank to the fuel rails in most vehicles.
This is a no scent line as well, so leaving the car in your garage will not upset the wife or smell up the whole house!
(0 reviews) -
Ford Performance Parts
Ford Performance 52 lb/hr Fuel Injector Set
Ford Racing MU52 56#/HR Rated Fuel Injectors. EV6 Plug design, which will fit all late-model Ford vehicles. Ideal for a Supercharged/Turbocharged Coyote swap, and will work on a Naturally aspirated Coyote swap wanting to run E85.
These injectors will support roughly 800 RWHP on 93 Octane Fuel and 650 RWHP roughly on E85 fuel.
(0 reviews) -
Fuel Injectors
OEM Coyote Injector
Factory Ford Coyote Fuel Injector. 36# rating, referred to as the LU35. Plug and Play replacement from all 11-21 Coyote engines, do not take a chance with your junkyard engine’s injectors potentially being stuck close, or stuck open, causing a long crank, or a no start condition.
The LU35 also works well on 05-10 3v Mustang Gt applications for those running under 10PSI of boost.
(0 reviews) -
Aeromotive
Aer. Dual Phantom 340LPH (2x)
Aeromotive’s Dual Phantom Stealth is the solution to your Forced Induction Swap Needs. (2) 340LPH Fuel Pumps capable of supporting 1000 HP Flywheel on Pump gas, and 850Hp flywheel on E85 fuel. Will fit virtually in any fuel tank or fuel cell that is 5.5″ to 11″ deep, extension kits are available if needed for a deeper fuel tank.
This is a return-style hat requiring a Feed and Return fuel line. The had is set up for -6AN, but we can configure it with the correct -8 AN ORB adapter if your fuel system is all -8AN.
Works very well in all 79-97 Mustang OEM fuel Tank, 66-77 Bronco, 65-73 Ford Mustang and Mercury Cougar, Ford Falcon, and All Ford F-100s running a mustang style fuel tank under the bed with the Coyote Swap application.
Works with all LS and Hemi Swaps.
Pictures in the gallery show the install on a customer’s Foxbody Mustang re-using the factory fuel tank found in the 79-97 Mustang’s, equipped with a Whipple supercharger. Clean install and clears the spare tire well floor with no fitment issues!
(0 reviews) -
Aeromotive
Aeromotive Phantom 340 Stealth Fuel System – 18688
Aeromotive Phantom Stealth Single 340LPH assembly is perfect for your Naturally aspirated or low boost application. Return Style hat with -6 AN Ports, comes complete with instructions, template, installation hardware, fuel pump and hat, and the sock. Will fit virtually any fuel tank from 5.5 inches to 11 inches deep. Works with Fuel cells as well! This set up is great for LS and Coyote swap candidates, as well as Vintage Bronco, F100, and Mustang’s. By running an intank pump the risk of it burning out on extended trips is virtually non existent. Do not get stuck running a loud external pump, grab this Phantom kit today!
(0 reviews) -
COOLING
Heater Hose Kit
Pair of Pre Molded Heater Core hoses to accompany the Hot Water Adapter kit. These supplied hoses have a 90* bend at one end, and are straight at the other to connect at the heater core. 48″ Long. 3/4 and 5/8 ID Hoses.
If 2 of the 5/8 or 2 of the 3/4 size hose is desired instead of 1 and 1 we can make that accommodation for you. Just specify at check out or call/email.
(0 reviews)