Showing 1–9 of 27 results
LS Swap Universal Fuel System – Sikky Kit -6 AN
The Sikky Manufacturing Long version LS Fuel Line Kit includes everything needed to setup your fuel system from your fuel tank to the fuel rail. Including an OEM Corvette fuel filter with built in Fuel Pressure Regulator (regulates at 55-58 psi), the necessary fittings, lines, and all of the hardware. This setup makes for an installation that is headache free and easy to install. This kit replaces the lines from the fuel tank to fuel rail.
Line length: 11′
Great way to take the guess work out of your fuel system for the LS Swap.
Drop Ships Directly from Sikky(0 reviews)$374.99
-Add to cart
McLeod RXT Twin Disc for T56 26-Spline
McLeod RXT Twin Disc Clutch for all T-56 Manual Transmissions with the 26 Spline Input Shaft. This clutch kit also fits TR-3650 with upgraded 26 Spline input shaft. Clutch is rated to hold up to 1000 HP and is the clutch of choice if your car sees abuse! Comes with clutch alignment tool.
Fits All : 03/04 Cobra w/26 Spline Input, 98-02 Camaro SS and Z-28, 01-10 Mustang GT/Bullitt/Mach 1/ Cobra with a Built TR-3650, All 11-17 Mustang GT’s with a T-56 Magnum swap, Coyote Swap with T-56 swap.
Direct Bolt up to all Coyote Swap engines when paired with McLeod’s Flywheel part # 463458. Will also work with Modular Shelby GT500 engines when paired to a T-56 trans. Works with Some OEM Coyote and Modular Flywheels, see NOTES below for info.
NOTE: GM LS-X Applications will only work with LS1/LS6 Flat style flywheels, 2001.5 to 2015 Mustang 4.6L/5.0L/5.4L factory flywheels may not work due to the large crank relief in the center of the flywheel. Crank relief must be 6.250 in. or smaller for correct disc to flywheel contact.(0 reviews)$955.00
-Add to cart
Coyote Swap/LS Swao or Drivetrain
McLeod RST Twin Disc For T-56 26 Spline 6912-07
McLeod RST Twin Disc Clutch for All 26 Spline T-56, TKO 500/600 Manual Transmissions. Part #6912-07 Great for a Naturally Aspirated set up, these are rated for 800 HP but these are NOT ideal for drag racing or back to back hard launches. This is more of a Street, road course and auto X style clutch. If you are looking for something that can take back to back abuse and heat cycles please look at the McLeod RXT clutch kit.
In stock and ships right away!(0 reviews)$775.00
-Add to cart
LS Swap OR Oil Pans
GM LS Swap 55-87 Cars & Trucks Moroso Kit
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
6 Quart capacity, comes with everything seen in the photo to make it a true bolt on in your LS swap.(0 reviews)
Sikky LS3 Swap Cold Air Intake
Sikky LS3 Swap Cold Air Intake Kit – Great for any LS3 Conversion, this kit features:
- 4″ Aluminum Tube
- LS3 MAF Bung
- Charcoal gray powder coating for excellent durability
- Sikky High Quality Dry Flow Air Filter (non-oiled)
- Sikky High Quality Couplers
- All Necessary Clamps
- Straight style intake for additional clearance. Perfect for applications where the curved intake might not work
- Designed to work with the Factory LS3 Mass Air Flow Sensor
- Intake Configurations vary with orientation of 90° Coupler.
- Configuration 1 suited for Maximum Radiator Clearance. Configuration 2 suited for Maximum Accessory Pulley Clearance
- Suitable for import and domestic vehicles, including hot rods, as well as off-road vehicles